Description
Lavasteen Seamless Floor & wall – Shiitake concrete look
Lavasteen Seamless Floor in Shiitake combines a warm concrete look with epoxy and lava stone. This creates a finish that performs daily and lasts for years.
You pour the mass and distribute it manually with a trowel. You determine the texture: sleek-minimalist or subtly vibrant. The result remains consistently matte on floor and wall.
Shiitake is a calm, earthy tone that brings warmth and depth. The colour pairs well with wood, natural stone and matte black details.
Spaces appear timeless and stylish. Less replacement means less waste and transport. Conscious luxury for everyday life.
Why choose a Lavasteen Seamless Floor?
- Fully waterproof – ideal in bathrooms; even with localised damage, the base layer remains waterproof.
- Highly scratch-resistant – lava stone reinforces the matrix; suitable for intensive use.
- Seamless & hygienic – no joints; stains cannot penetrate and cleaning is quick.
- Thin layer & underfloor heating – efficient heat transfer; quiet and energy-efficient.
- Control over appearance – manual distribution: sleek and uniform or subtly vibrant.
- Low-maintenance – daily ease; aggressive cleaning agents are unnecessary.
What is a Lavasteen Seamless Floor?
Lavasteen Seamless Floor consists of a component A with pigment and a component B (hardener). After mixing, a solid, trowelable paste is formed.
You pour the mass and spread it manually. This gives you control over texture and nuance. A traditional self-levelling floor flows by itself; Lavasteen Seamless Floor offers freedom and control.
Want to know how Shiitake performs in the shower? Read the blog Lavasteen shower floor for tips and practical examples.
Applications & Substrates
Residential: floors, bathrooms, kitchens, stairs and furniture. Commercial: shops, hospitality and offices. New-build & renovation: sleek and low-maintenance.
Adheres to: concrete, cement, tiles (with primer), plaster, wood and MDF. Working over tiles? Level joints and the entire surface with Stucopaste. Then use primer for adhesion.
In wet areas, the system remains waterproof and hygienic. Shiitake is therefore a smart choice for showers and wellness spaces.
Applying Shiitake Yourself – Steps
- Prepare substrate guide– stable and clean; use primer if necessary.
- Mixing – stir A-component until homogeneous; add B-component and mix for 2–3 minutes.
- Layer 1 – apply thin and sleek; remove tape; dry for 24 hours.
- Layer 2 – choose sleek or vibrant; lightly mist and distribute for nuance.
- Curing & sanding – cure for 24 hours; sand with 80-grit.
- PU topcoat (matte) – protects against yellowing and fills the texture; the surface remains matte.
What's included in the package
- Lavasteen Seamless Floor mix in Shiitake (7.15 kg – components A and B, pre-weighed).
- Primer (recommended) – for adhesion.
- PU topcoat (matte) (optional) – UV-resistant and fills the texture.
- Clear instructions – step-by-step guidance.
View Shiitake at home? Choose consciously based on real samples and your lighting conditions.
Comparison with other finishes
- Lavasteen Seamless Floor (Shiitake) – applied manually with trowel; matte concrete look; hard, scratch-resistant and waterproof; suitable for floor & wall.
- Epoxy resin floor – self-levelling; less suitable for residential properties or underfloor heating.
- PU resin floor – elastic and comfortable; less scratch-resistant.
- Beton Ciré – cement-based; only waterproof with PU layer; less wear-resistant.
Frequently asked questions
What exactly is Lavasteen Seamless Floor – poured floor or render?
Lavasteen Seamless Floor is a concrete plaster with epoxy. You pour the mass and spread it with a trowel. This allows you to control the texture and achieve a natural, matte concrete look.
Does Lavasteen Seamless Floor work well with underfloor heating?
Yes. The thin layer conducts heat excellently. Comfortable and energy-efficient.
Is Lavasteen Seamless Floor suitable for the shower?
Yes. The system is waterproof. Even if the top layer is damaged, the base layer remains protected. For aesthetic and hygiene reasons, repair is advisable.
Can I work over tiles?
Yes, provided it is stable. Level joints and surface with Stucopaste. Then use primer for adhesion.
What layer thickness and lead time applies?
Work in a thin layer and allow approx. 24 hours drying time per layer. Light loading is possible after the topcoat; intensive use later.
Knowledge centre and support
Questions about colour, technique or planning? Our specialists support you from start to finish. Get in touch via our contact page.
Our goal: knowledge transfer, efficient working methods and guidance towards a Shiitake finish you will enjoy for years.
Reviews
There are no reviews yet.