Types of seamless floors
which one suits you?

1. Microcement

Mineral-based — composed of cement, polymer and pigments. Finished with PU topcoat for waterproofing. Applied thinly (1–2 mm) over your existing substrate — including over tiles, after cleaning, sanding and priming. Matte-minimalist.

Strong in: walls, furniture, stairs, accent surfaces. Less suitable for: floors in wet rooms (PU can be damaged → mineral absorbs moisture). Price range: € 31/m² DIY, € 80–120/m² installed.

2. Lavasteen Resin Floor (epoxy with ground lava stone)

Epoxy-based with finely ground lava stone. Inherently waterproof, even when damaged — no mineral substrate underneath that absorbs moisture. Slightly more robust and wear-resistant than microcement. PU topcoat for ease of maintenance.

Ideal for: floors in wet rooms (bathroom, shower, toilet), living spaces with intensive use. Less suitable for: walls in dry spaces — microcement is the more logical choice there; in bathrooms Lavasteen can be applied to walls. Price range: € 47/m² DIY, € 90–150/m² installed.

3. Polyurethane resin floor (PU)

100% synthetic floor, often used in industrial environments (showrooms, car showrooms, production halls). Hard, scratch-resistant, chemically resistant. Visually rather 'artificial' — less warm than microcement or Lavasteen.

Strong in: commercial spaces, garages, sports floors. Less suitable for: residential environments (too clinical, too industrial). Price range: € 60–200/m² depending on specification.

4. Polished concrete

Not a true seamless floor but often confused — polished concrete is a thick concrete sub-floor (≥80 mm) that has been mechanically ground to a smooth surface. Cannot be applied over existing substrates; requires complete removal during renovation. A raw industrial look, with colour options limited by the concrete mix.

Strong in: new-build, lofts. Less suitable for: renovations, bathrooms (high porosity). Price range: € 90–200/m² new-build.

Bathroom floor or shower

Advice: Lavasteen Seamless Floor. Waterproof by nature, remains so even when damaged. We advise against microcement here — if something drops, the PU layer can crack and the mineral layer underneath can absorb moisture.

Bathroom wall

Recommendation: microcement. Walls do not see falling objects, so no risk of PU damage. Wider colour choice, more beautiful matte-minimalist appearance. Combine with Lavasteen floor for a seamless whole.

Living room or bedroom floor

Advice: Lavasteen Seamless Floor. Robust for daily use, warm in appearance. Combines well with wooden furniture and natural materials.

Kitchen floor

Advice: Lavasteen Seamless Floor. Seamless — no joints where dirt or water can seep in around the hob. Stain-resistant thanks to PU topcoat. For intensive cooking: choose 2–3 PU layers for extra resistance.

Staircase or furniture

Recommendation: microcement. Can be applied thinly to any geometry (vertical, horizontal, curved). Wear-resistant with 2 PU layers on a staircase.

Commercial space or garage

Recommendation: PU resin floor. Harder surface, higher load-bearing capacity, chemically resistant. Microcement and Lavasteen are primarily for residential use, not for industrial loads.

What is the difference between microcement and beton ciré?

Closely related but not identical — beton ciré is the French name from the same product family; microcement is harder and has a calmer pattern. Both are mineral finishes based on cement. We use 'microcement' because it is the internationally standard product term.

Can I apply a seamless floor myself?

Yes, in principle. Our kits are packaged in a DIY-friendly manner with clear step-by-step instructions. With basic DIY skills, you can apply a wall or smaller floor (up to 25 m²) yourself. For larger surfaces and complex spaces (bathroom with drains), we often recommend a professional.

How long does a seamless floor last?

With normal use: 15+ years. The mineral or epoxy layer itself lasts decades. The PU topcoat may wear after approximately 8–12 years and can then be reapplied — in 1 day's work — without replacing the entire floor.

Can a seamless floor be applied over existing tiles?

Yes, that's one of the major advantages. With a bonding primer, we apply our layers over tiles after proper preparation (cleaning, sanding, bonding primer). This saves demolition costs and waste disposal. However: tiles must be firmly attached (no loose tiles, no cracks), otherwise local levelling is required first.